-33-
address. Click <Disconnect> to disconnect the Internet and
release the current IP address.
Account Name:
Enter the Account Name provided by your ISP. If you are not
clear, please consult your ISP.
Password:
Enter the Password provided by your ISP.
Server IP:
Enter the Server IP provided by your ISP.
MTU:
MTU (Maximum Transmission Unit) is the maximum data
unit transmitted by the physical network. It can be set in the
range of 576-1460. The default MTU is 1460. You are
recommended to keep the default value if no other MTU
value is provided by your ISP.
Active Mode:
You can select the proper Active mode according to your
need.
z Manual: Select this option to manually activate or
terminate the Internet connection by the <Connect> or
<Disconnect> button. It’s optimum for the dial-up
connection charged on time.
z Always-on: Select this option to keep the connection
always on. The connection can be re-established
automatically when it is down.
Secondary Connections:
Here allows you to configure the secondary connection.
Dynamic IP and Static IP connection types are provided.
Connection Type:
Select the secondary connection type. Options include
Disable, Dynamic IP and Static IP.
IP Address:
If Static IP is selected, configure the IP address of WAN port.
If Dynamic IP is selected, the IP address of WAN port
obtained is displayed.
Subnet Mask:
If Static IP is selected, configure the subnet mask of WAN
port. If Dynamic IP is select, the subnet mask of WAN port
obtained is displayed.
To Next Page
Loading...
Need help?
General
