-34-
Default Gateway:
If Static IP is selected, configure the default gateway. If
Dynamic IP is selected, the obtained default gateway is
displayed.
Primary DNS/Secondary DNS:
If Static IP is selected, configure the DNS. If Dynamic IP is
selected, the obtained DNS is displayed.
Upstream Bandwidth:
Specify the bandwidth for transmitting packets on the port.
Downstream Bandwidth:
Specify the bandwidth for receiving packets on the port.
¾ PPTP Status
Status:
Displays the status of PPTP connection.
z “Disabled” indicates that the PPTP connection type is
not applied.
z “Connecting” indicates that the Router is obtaining the
IP parameters from your ISP.
z “Connected” indicates that the Router has successfully
obtained the IP parameters from your ISP.
z “Disconnected” indicates that the connection has been
manually terminated or the Router gets no response
from your ISP. Please ensure that your settings are
correct and your network is connected well. Consult
your ISP if this problem remains.
IP Address:
Displays the IP address assigned by your ISP.
Primary DNS:
Displays the IP address of your ISP’s Primary DNS.
Secondary DNS:
Displays the IP address of your ISP’s Secondary DNS.
To Next Page
Loading...
Need help?
General
