EasyManuals Logo

TP-Link TL-R470T User Manual

TP-Link TL-R470T
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
-79-
¾ List of Rules
You can view the information of the entries and edit them by the Action buttons. The smaller the value
is, the higher the priority is.
The first entry in Figure 4-43 indicates: The TELNET packets transmitted from the hosts within the
network of 192.168.0.0/24 will be not allowed to pass through the Router at 8:00-20:00 from Tuesday
to Saturday.
Note:
For the users in the private network and not being set access rule, the default Policy is Allow.
To specify all IP addresses, type “0.0.0.0 / 32” in the Policy field.
For detailed setting of subnet mask, please refer to Appendix B FAQ.
4.6.4.4 Service
The Service function allows you to specify the protocol and port number to be filtered for Firewall
function conveniently. Protocol name and port range constitute a service type. The Router predefines
three commonly used services such as HTTP, FTP and TELNET and you can also add customized
services if needed.
Choose the menu FirewallAccess ControlService to load the following page.
Figure 4-44 Service
The following items are displayed on this screen:

Other manuals for TP-Link TL-R470T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-R470T and is the answer not in the manual?

TP-Link TL-R470T Specifications

General IconGeneral
ProtocolsTCP/IP, PPPoE, DHCP, ICMP, NAT
DHCPDHCP Server, DHCP Client
Firewall SecurityIP and MAC Address Binding
Ports5 x RJ45 ports
VPN SupportPPTP VPN, L2TP VPN, IPSec VPN
ManagementWeb-based GUI
Operating Temperature0°C to 40°C (32°F to 104°F)
Storage Temperature-40°C to 70°C (-40°F to 158°F)
Operating Humidity10% to 90% non-condensing
Storage Humidity5% to 90% non-condensing

Related product manuals