EasyManua.ls Logo

TP-Link TL-SH1008 - Page 9

TP-Link TL-SH1008
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To ensure long-term stable operation of the switch and extend its service life, please maintain a certain temperature and humidity in the environment. Too high or too low ambient humidity can
easily cause leakage, deformation and even corrosion of metal parts in insulating materials. Excessive temperature will accelerate the aging process of insulating materials and seriously affect
the service life of equipment. The normal operating and storage temperature/humidity of this model switch is as shown in the following table:
ÿ Regular dust removal to keep indoor air clean;
ÿ Switches should be kept away from high-frequency, high-power, and high-current equipment, such as wireless transmitters;
ÿ Confirm that the equipment is well grounded to ensure smooth transfer of static electricity.
ÿ Take electromagnetic shielding measures if necessary.
Electromagnetic interference will affect electronic components such as capacitors and inductors inside the equipment through conduction methods such as capacitive coupling, inductive
coupling, and impedance coupling. To reduce the adverse effects of electromagnetic interference factors, please pay attention to the following matters:
Dust falling on the surface of the switch will cause electrostatic adsorption and cause poor contact of the metal contacts. Although the device itself has taken certain anti-static measures, when
static electricity exceeds a certain intensity, it will still cause fatal damage to the electronic components on the internal circuit board. To prevent static electricity from affecting the normal operation
of the device, please pay attention to the following matters:
ÿ The power supply system takes necessary measures to resist grid interference;
2.5Gbps Ethernet Switch Installation Manual
Indoor dustproof
temperature humidity
electromagnetic interference
Table 2-1 Temperature/humidity requirements for normal use of the switch
ÿ Installation environment precautions
40ÿ
0ÿ
Product installation 04
Relative humidity
working environment
environment description
-40ÿ~70ÿ
0ÿÿ40ÿ
5%ÿ90%RH no condensation
temperature
10%ÿ90%RH no condensation
Storage environment
Machine Translated by Google

Related product manuals