the Username and Password.
Enter the default values and click
OK.
Note
If the dialog box does not pop up, please refer to T3 in the Troubleshooting
guide. T2 will give you some help if you forget the password.
Username: admin
Password: admin
After successfully logging in, this
page will then display.
You may need to change the
LAN IP address and the
gateway according to you
network.
Click Save after you
have completed this
settings
Click Network
Note
If you have changed the LAN IP address, please log in to the Access Point
using the new IP address.
To Next Page
Loading...
