TL-WA701ND 150Mbps Wireless N Access Point User Guide
Figure 3-2 Login Windows
)
Note:
If the above screen does not prompt, it means that your web-browser has been set to a proxy.
Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that
appears, cancel the Using Proxy checkbox, and click OK to finish it.
2. After successfully logging in, the Quick Setup page will display. Click Next to continue.
Figure 3-3 Quick Setup
)
Note:
If you click Exit and choose to manually configure the AP on your own need, please note that
the DHCP is enabled during the configuration, it is essential to disable DHCP when all the
settings are finished.
3. The Operation Mode page will appear then, shown in Figure 3-4. The TL-WA701ND
supports up to five operation modes.
8
To Next Page
Loading...
