Figure 3-27 Quick Setup - PPPoE
2. You can configure the basic settings for the wireless network on this page.
Figure 3-28 Quick Setup - Static IP
SSID - The SSID of the AP your router is going to connect to as a client. You can also use
the search function to select the SSID to join.
BSSID - The BSSID of the AP your router is going to connect to as a client. You can also
use the search function to select the BSSID to join.
Survey - Click this button, you can survey the AP which runs in the current channel.
Key type - This option should be chosen according to the AP's security configuration. It
- 26 -
To Next Page