is recommended that the security type is the same as your AP's security type.
WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX).
It indicates the index of the WEP key.
Auth type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX).It
indicates the authorization type of the Root A P.
Password - If the AP your router is going to connect needs password, you need to fill the
password in this blank.
Local SSID - Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your network.
Wireless Security Mode - You can configure the security settings of your wireless
network.
Wireless Password - Input the password of your Local SSID.
3. Click Survey button on the Wireless page as shown in Figure 3-23, and then AP List page will
appear as shown in Figure 3-29. Find the SSID of the Access Point you want to access, and
click Connect in the corresponding row. For example, the second item is selected. The target
network’s SSID will be automatically filled into the corresponding box which is shown as the
Figure 3-23. Then click Next.
Figure 3-29 AP List
4. The Finish page is shown as Figure 3-30. Click the Reboot button to make your wireless
configuration take effect and finish the Quick Setup.
Figure 3-30 Quick Setup – Finish
- 27 -
To Next Page
Loading...
