EasyManua.ls Logo

TP-Link TL-WR820N - Security; Firewall; Access Control

TP-Link TL-WR820N
155 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
95
Chapter 5
Congure the Router in WISP Mode
1 ) Enable Time Limits on Monday to Friday and Saturday & Sunday then set the
allowed online time to 2 hours each day.
2 ) Enable Bed Time on School Nights and use the up/down arrows or enter times
in the fields. Devices under this profile will be unable to access the internet
during this time period.
3 ) Click SAVE.
Note: The effective time limits are based on the time of the router. You can go to Advanced > System > Time to
modify the time.
Done!
The amount of time your child spends online is controlled and inappropriate content is
blocked on their devices.
5. 6. Security
This function allows you to protect your home network from cyber attacks and
unauthorized users by implementing these network security functions.
5. 6. 1. Firewall
The SPI (Stateful Packet Inspection) Firewall protects the router from cyber attacks
and validate the traffic that is passing through the router based on the protocol. This
function is enabled by default.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > Security > Firewall, and configure the parameters as you need. It’s
recommended to keep the default settings.
5. 6. 2. Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).

Table of Contents

Other manuals for TP-Link TL-WR820N

Related product manuals