115
Chapter 6
Congure the Router in Access Point Mode
3. Select your IP type.
• Dynamic IP - Your device will get its IP address from the host router.
• Dynamic IP - You need to specify the IP Address (factory default - 192.168.0.1),
Subnet Mask (factory default - 255.255.255.0) and Default Gateway (factory
default - 192.168.0.254).
4. Click SAVE .
6. 3. Wireless
6. 3. 1. Wireless Settings
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Wireless > Wireless Settings.
3. Configure the wireless settings for the wireless network and click SAVE.
To Next Page
Loading...
