13
Chapter 2
Connect to the Internet
2. 2. 4. WISP Mode
This mode connectes to the ISP network wirelessly in areas without wired service.
1. Connect the power adapter to the router and power on the router.
2. Connect a computer to the router via an Ethernet cable or wirelessly by using the
SSID (wireless name) and password printed on the bottom label of the router.
3. Enter http://tplinkwifi.net in the address bar of a web browser. Create a password
to log in.
4. Click Change Mode in the top right corner and select WISP Mode. Wait for the
router to reboot.
Tip: You can also go to Advanced > Operation Mode to switch to WISP Mode.
5. Follow the Quick Setup to set up the internet connection.
6. Enjoy! Connect your devices to the wireless network and enjoy the internet.
To Next Page
Loading...
