EasyManua.ls Logo

TP-Link TL-WR820N - Remote Management

TP-Link TL-WR820N
155 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59
Chapter 4
Configure the Router in Wireless Router Mode
3. Click VIEW CONNECTED DEVICES and select the device to manage the router from
the Connected Devices list, or enter the MAC address of the device manually.
4. Click SAVE .
4. 10. 5. Remote Management
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > System > Administration, and focus on the Remote Management
section.
Forbid all devices to manage the router remotely:
Do not tick the Enable checkbox of Remote Management.
Allow all devices to manage the router remotely:
1. Tick the Enable checkbox of Remote Management.
2. Keep the HTTP port as default setting (recommended) or enter a value between 1024
and 65535.
3. Select All Devices for Remote Managers.
4. Click SAVE .
Devices on the internet can log in to http://Router’s WAN IP address:port number (such
as http://113.116.60.229:1024) to manage the router.

Table of Contents

Other manuals for TP-Link TL-WR820N

Related product manuals