93
Chapter 5
Congure the Router in WISP Mode
2. Go to Advancec > Parental Controls.
3. Click Add to create a profile for a family member.
4. Add basic profile information.
1 ) Enter a Name for the profile to make it easier to identify.
2 ) Under Devices, click
.
3 ) Select the devices that belong to this family member. Access restrictions will
be applied to these devices. Click ADD when finished.
Note: Only devices that have previously been connected to your router’s network are listed here. If
you are unable to find the device you want to add, connect it to your network and then try again.
4 ) Click NEXT.
5. Block content for this profile.
To Next Page
Loading...
