EasyManuals Logo

T+A HV Series User Manual

T+A HV Series
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
Note regarding the use of headphones
Continuous listening to programme material at very high volume using
headphones or earphones can result in permanent loss of hearing. You can
avoid subsequent health problems by avoiding continuous listening at high
volume through headphones or earphones.
FRONT USB SOCKET (USB IN)
USB IN
Socket for a USB memory stick or an external hard disc.
The storage medium can be formatted with the FAT16, FAT32, NTFS, ext2,
ext3 or ext4 file system.
The USB storage medium can be powered via the USB socket provided that
its current drain meets the USB norm (< 500 mA). Normalised 2.5” USB hard
discs can be connected directly to this socket, i.e. they require no mains
PSU.
REMOTE CONTROL RECEIVER
When using the remote control system please point the F3100 handset in the
direction of the receiver.
It is essential to prevent potentially interfering light (from fluorescent lamps
and energy-saving bulbs) falling directly on the receiver, as this may
markedly reduce the effective range of the remote control system.
The line of sight between the F3100 and the remote control receiver in the
SDV 3100 HV must not be interrupted by any obstacles.
DISPLAY
The graphic screen of the SDV 3100 HV displays all information regarding the
status of the machine, the music track currently being played and the radio
station currently tuned. The display is context-sensitive and varies according
to the capabilities and facilities of the service or medium to which you are
currently listening.
The most important information is highlighted on the screen in a context-
sensitive manner. Supplementary information is displayed above and below
the main text, or by means of symbols.
The displays and symbols which appear on the screen vary according to the
currently active function (Tuner, UPnP, etc.) and the type of music currently
being played.
The basic areas of the screen:
Display field (a) shows the currently active source.
Display field (b) shows information relating to the piece of music being
played. The essential information is displayed enlarged in the main line.
Display field (c) shows information relating to the device and playback.
The bottom line (d) displays supplementary context-sensitive information
(e.g. bitrate, elapsed time, state of reception)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the T+A HV Series and is the answer not in the manual?

T+A HV Series Specifications

General IconGeneral
BrandT+A
ModelHV Series
CategoryAmplifier
LanguageEnglish

Related product manuals