T+A HV Series User Manual

20
Display Mode
menu item
This menu item offers the choice between three different display operation
modes:
 Always on
 Temporary
 Always off
Selecting 'Temporary' will switch the display is on for a short while each
time the SDV 3100 HV is being operated. Shortly after operation the display
will be switched off again automatically.

The brightness of the display can be adjusted separately with the menu item
'Display Brightness' (see above).
Language
menu item
In this menu item you define the language to be used for the displays on the
screen of the front panel of the SDV 3100 HV.
The language used for data transferred to the machine, e.g. from an Internet
radio station, is determined by the supplying device or the radio station; you
cannot define the language on the SDV 3100 HV.
Device name
menu item
This menu point can be used to assign an individual name to the
SDV 3100 HV. In a home network the device then appears under this name.
If an amplifier is connected via the HLink connection, then the amplifier is
able to accept this name automatically, and display it on the screen.

The amplifier only accepts this name if an individual name has not already
been assigned at the amplifier itself.
Energy Saver
menu item
The SDV 3100 HV features two stand-by modes: ECO Standby with reduced
stand-by current drain, and Comfort Standby with additional functions, but
slightly higher current drain. You can select your preferred stand-by mode in
this menu point:
On (ECO standby):
Active functions in ECO standby mode:
 Power-on at the device itself.
Automatic power-down after ninety minutes without signal (only possible
with certain sources).
Off (Comfort standby):
The following expanded functions are available:
 Unit can be switched on using the app.
 The automatic power-down function is disabled in Comfort standby
mode.
 The picture and sound signals at the HDMI 1 and 2 sources are passed
on to the connected TV even if the device is in standby mode.
Network
menu item
All network settings can be carried out at this menu point. For a detailed
description on setting up a LAN or WLAN connection please also refer to the
section entitled “Network configuration” on page 51.
Music services
menu item
At this point you can enter the access data for the music streaming services
(TIDAL etc.) supported by the SDV 3100 HV.
Calling up this menu point by pressing the  button displays a list of
the supported music services.
Select the service you wish to use, then confirm your choice with the 
button.
Now use the alpha-numeric keypad of the F3100 to enter the access data
which you have received from your service provider in the lines “User” and
“Passphrase”.

T+A HV Series Specifications

General

Brand	T+A
Model	HV Series
Category	Amplifier
Language	English