TPS miniCHEM-pH - Unpacking Information

Page 6
1.2 Unpacking Information
Before using your new miniCHEM-pH, please check that the following
accessories have been included:
Part No
1. miniCHEM-pH Process Monitor........................... 111140
2. pH6.88 Buffer, 200mL ..........................................121306
3. pH4.00 Buffer, 200mL ..........................................121381
4. miniCHEM-pH Handbook.................................... 130050
Options that may have been ordered with your miniCHEM-pH:
Dip mounted pH and ATC Sensors, and submersible assembly…
1. Submersible, Non-flow pH Sensor, 5m................... 111228
2. Intermediate Junction pH Sensor, 5m...................... 111227
3. Industrial 12K ATC Sensor, 5m.............................111275
4. Submersible protective housing for pH & ATC ......111303
Screw-in pH and ATC Sensors, and adaptor for 40mm PVC pipe…
1. Screw-in, Non-flow pH Sensor, 5m........................ 111244
2. Screw-in Industrial 12K ATC Sensor, 5m .............. 111265
3. ¼” BSP thread adaptor for 40mm PVC pipe........... 111305
Instrument options…
1. Relay control output............................................... 130342
2. 4-20mA loop-powered, remote LCD....................... 130080