Operation and Installation Manual
KRT2 VHF-Communication Transceiver
Doc.-No: KRT2.A-MAN.en
Rev. 0101
ON / OFF Self-locking switch
DUAL WATCH
1. Scanning between the Active and Standby fre-
quencies
2. Positioning cursor to the left when programming
the station identifier
AUDIO SELECT
1. Stepping through the audio menus
2.
VOL SQ VOX TX INT EXT DIM CON SIT and MIC
3. Positioning cursor to the right when programming
the station identifier
FAVORITES
1. Frequency and identifier selection from the favour-
ites list
2. Programming of favourites (frequency and identifi-
er)
EXCHANGE
Exchange of the Active and Standby frequencies
TURNING KNOB
Pressing for Selection of the frequency range to:
MHz, 100kHz, 10kHz
Toggles between frequency and identifier when pro-
gramming the favourites
Sets all variable values in any menu
• Volume setting of headsets and speakers
• MHz/kHz selection of the standby
• frequency in 3 different ranges
• Favourite selection
• Alpha character selection when programming
favourites
• Change of microphone settings
Table 4: KRT2 Controls
To Next Page
Loading...
Need help?
General