Termination and Save
To save the entered identifier, press the key as the cursor is on the station name, “SAVE” will
appear and the system will go back to the favourite selection.
A sorting process can be activated by pressing the “MEM” button again from the EDIT-mode.
“SORT?” will be displayed for 20 seconds and it should be activated with or skipped with
“MEM”.
When activated all 99 favourites will be sorted in alphabetical order and the process can take several
minutes.
During the sorting procedure “RUN nn“ is displayed in the program window, with nn being the running
index.
After a 6 seconds time out or by ending the sort, the transceiver resumes its normal operating mode.
When the “MEM” button is pressed at the time “RUN nn“ is displayed, the sorting procedure is termi-
nated. The favourite list is then partially sorted and the transceiver resumes its normal operating
mode.
Example:
1. Button MEM -> SEL [23] = Select location
2. Button MEM -> -EDIT- = Input of name
Rotation knop to select the characters
For cursor use (AUD) (DUAL)
Frequency setting -> press rotating button
Use button MEM to go back to -EDIT-
3. Button -> shortly SAVE -> back to 1.) (do nothing = cancelling)
4. Button MEM -> question for “SORT?” Yes = , No = MEM or do nothing.
If the function is abandoned before completion, it will be exited after a 6 seconds time out with no ac-
tivity. The data will not be saved.
To Next Page
Loading...