TQ KTX2 Installation Manual

58 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Document No. TQG191-IM

KTX2 MODE-S(ES) ADS-B TRANSPONDER

Part Number 304110 (XX)

Installation Manual

(Approved Model List Supplemental Type Certificate)

This manual contains installation instructions and recommended flight line maintenance

information for the KTX2 ADS-B Transponder System. Guidelines for external equipment

necessary for installation are included. This information is kept current by revisions, service

letters and service bulletins.

Table of Contents

Other manuals for TQ KTX2

Operation And Installation Manual48 pages

Questions and Answers:

J
Jeffrey ChapmanAug 15, 2025
How to troubleshoot a TQ Marine Radio KTX2 with no power or blank screen?
- K
  Kathryn JohnsonAug 15, 2025
  If your TQ Marine Radio KTX2 shows no sign of power or the screen is blank, here's what to check: 1. Make sure the KTX2 breaker is closed. Check and reset the circuit breaker. 2. Confirm that power and ground are correctly supplied to the KTX2. 3. If the issue persists after checking the breaker and power supply, replacement of the KTX2 may be required.
B
Brandy ContrerasAug 18, 2025
What to do if the 'BAT LOW' message appears on my TQ Marine Radio KTX2?
- R
  Robert SnyderAug 18, 2025
  If the 'BAT LOW' message appears on the center of the screen of your TQ Marine Radio KTX2, it means the voltage is below 11 VDC. Here’s what you should do: 1. If the engine is running, increase the RPM. 2. If the engine is off, recharge or replace the battery. The KTX2 is designed to operate above 9 VDC, so determine the cause of the low voltage before the next use.

TQ KTX2 Specifications

General

Brand	TQ
Model	KTX2
Category	Marine Radio
Language	English

Related product manuals

Preview: TQ KTX2-F