Trace2O METALYSER FIELD PRO HM3000 User Manual

In-line waterproof cable connector
Warning: Sonde head is designed for submersion up to 1 metre in water. Lowering
the head deeper than this may result in water ingress which will require sonde head
replacement.
Note: A clamp and stand are provided. The stand
slots into the hole in the right hand rear corner of
the box. This can be used to clamp the Sonde as
shown above, which improves stability during the
analysis.
Metalyser® Field Pro HM3000 Instruction Manual v 5.0
www.trace2o.com
12

Trace2O METALYSER FIELD PRO HM3000 Specifications

General

Brand	Trace2O
Model	METALYSER FIELD PRO HM3000
Category	Measuring Instruments
Language	English