OPERATION
17
E. Starting and Operating Instructions
a. Before starting the engine, the driver must seat properly in the kart with the seat belt on.
b. Practice in the kart in an open space at the beginning to learn how to start, turn and stop the
kart.
c. Drive slowly until you are familiar with the operation of the TrailMaster Go-kart MID.
d. The turning radius of this kart is small and agile, so the centrifugal force is very high when
turning at high speed. Slow down to a more controllable speed when turning to prevent the kart
from rolling over. The driver should keep their heels on the ramp of the main board when turning.
Keeping their legs on the foot pedal (See Fig.4), the driver can feel that the kart is stable and won't
roll over.
Figure 4 Heels and legs position by driving the kart
To Next Page
Loading...
