TrailMaster TAURUS 400UTV - Exterior and Accessory Installation; Speedometer Installation; Bumper Mounting; Turn Light Connection

Install the cover and back of
speedometer by the use of tapping
screws① ST4.8×16.
●Install the bumper to the frame
by the use of two boltsM8×20② &
M10×40.③
Torque of bolt②
(M8×20) 21～25N.m
●Connect the cable of the turn
light.
Torque of bolt③
(M10×40) 35～
40N.m
●Install the cargo box to the frame
by the use of the pin①, rubber
spacer②, flap gasket③ 12 and
cotter pin④4×20.
①
②
③
①
②
④
③