●Fix the safety belt to the roof
frame with attachment bolts.
Note: Make sure the belt is passed
through from the front of the head
rest bracket and is threaded from
the back of the back rest bracket so
as to avoid the damage of the belt
caused by friction between the belt
and the metal plate.
！ WARNING
Be sure the seat belt is close-fitting
across your hips and chest and is
latched securely. If not it will cause
serious personal injury or death.
●Install the head rest and back
rest on their respective brackets
after fixing the brackets to the roof
frame with big palm end bolts M6 x
16 and acorn nuts M6.Note: Make
sure the fitting position of the head
rest/back rest is as shown in Fig.
left.
To Next Page
Loading...
