Trane Air-Fi WCS-SB/R - Locking or Unlocking Settings

BAS-SVX40K-EN
57
The arrow to the
left of the
temperature indicates
that it is the setpoint.
Locking or Unlocking Settings
You can lock or unlock the setpoint, system, or fan setting to prevent changes.
To lock or unlock a setting:
1. Verify that the sensor is in operating mode and at the home screen.
2. Choose a setting to lock or unlock:
• Select the setpoint by pressing the up or down arrow.
Setpoint
• Select the system menu by pressing the center button. Use the left or right arrow to choose the
setting.
System menu
• From the system menu press the down arrow to select the fan menu. Use the left or right arrow
to choose the setting.
Fan menu
3. Press the left and right arrows for 4 seconds.
WCS-SB/SD Configuration