BAS-SVX40K-EN
79
for all existing wireless networks within radio range of Tracer TU. A closed padlock icon indicates
that a Tracer SC login is required. An open padlock icon indicates that no Tracer SC login is
required.
Figure 46. Initial network utilities dialog box
4. Select the network you want Tracer TU to join and click Join.
Note: Starting with Tracer TU version 11.0 you will be required to open the Air-Fi
®
network before
joining. The State column shows which networks are open.
Note: Tracer TU can join only one network at a time.
• If a Tracer SC is present on the network, a log-in prompt appears. Enter your Tracer SC user-ID
and password. After log-in, the Wireless Network Utilities dialog box appears as shown in the
next figure.
• If no Tracer SC is present on the network, the dialog box shown in the next figure appears
without the need to log in.
In the Security column, the lock icon is replaced by a key icon to identify the network that Tracer TU
has joined, and two additional tabs appear on the screen.
Using the Tracer® TU Service Tool with a Wireless Network
To Next Page
Loading...
