Trane BAYSENS924 - Configuring Human Interface to READ ONLY MODE; BAYSENS 924 Programming Quick Reference; Access Programming Screens; 1;2 - Network Settings Screen

RQC-2017-021 Version-1 1/9/18
3
of 8
Page



Conguring Human Interface to READ ONLY MODE
 
  
  
  
  
ThescreenwillreadDISPLAYREADONLYMODE
• Press and hold down a finger
where indicated.
1. Sensor Address: 002
2. Unit Address: 003
Note: Unit Address must match BCI board switches
BAYSENS
924
Programming Quick Reference
Refer to Interface Flowchart in the Installer Guide starting on Page 7
Access Programming Screens
1/2 - Network Settings Screen
Trane
2018 BAYSENS924 Thermostat Programming - Quick Reference