2
18-HH32D1-1C-EN
General Data
This accessory kit is intended for use on Trane or
American Standard units that are purchased without a
plastic top. The accessory assembles on top of the unit.
No parts, e.g. sheet metal top or fan grille, should be
removed from unit before installation of kit.
KKiitt CCoonntteennttss::
Items
Quantity
Plastic Top 1
Adapter Ring 1
Support Clip, Small 3
Support Clip, Large 1
#12 Screw 4
Foam Gasket
1
IInnssppeeccttiioonn::
Check carefully for any shipping damage. This must be
reported to and claims made against the transportation
company immediately. Any missing parts should be
reported to your supplier at once and replaced with
authorized parts only.
DDiimmeennssiioonnss::
The table below displays added height to unit after kit
installed.
Weatherguard Top Height (Inches)
BAYTWGR004 7.75
BAYTWGR003 7.06
BAYAWGR004 7.75
BAYAWGR003 7.06
To Next Page
Loading...
