30
Section 17. Start Up
STEP 2 - Set the system thermostat to OFF.
STEP 3 - Turn on electrical power disconnect(s) to
apply power to the indoor and outdoor units.
STEP 4 - Set the system thermostat to ON.
OFF
D
N
CANCEL
STEP 1 - Make sure all panels are securely in place
and that all wiring has been properly dressed and
secured.
17.2 System Start Up
17.1 System Charge Adjustments
System Matched with: Indoor Unit Model No. Outdoor Unit Model No. Subcooling
13 SEER HP GAF2A0A36S31
4TWR3036C1
4A6H3036C1
4TWB3036C1
6°
All other matches must be charged per the nameplate charging instructions.
To Next Page
Loading...
Need help?
General
