12 PKG-SVP01B-EN
General
InformationProgramming
3. VOM Active
If at power up the unit is running
and has entered a ventilation override mode, the
following display will appear on the human interface LCD screen.
4. No Configuration
If at power-up the unit has not been programmed with the necessary configuration
data for normal unit operation, the following display will appear at the human interface
LCD screen. When this screen displays, the only functional key is the CONFIGURA-
TION key.
Note: This screen will only appear when the RTM has been field replaced. Refer to the
Configuration Menu section on page 63.
Ventilation Override Mode
______
VO Mode in Operation
(A, B, C, D, E)
Trouble Indicator
(Blank)
(Diagnostics)
To Next Page
Loading...
