Trane IntelliPak Signature Series - Page 49

PKG-SVP01B-EN
49
Programming
(On all water-cooled units and/or units with a waterside economizer)
Temperature Calibration Offset For
WSM Entering Water Temp Input 0.0 F
Factory Preset: 0.0 F
Possible Values: 0.0-5.0 F
1. Pressing the NEXT key will display the following screen.
(On all water-cooled units and/or units with a waterside economizer)
Temperature Calibration Offset For
WSM Mixed Air Temp Input 0.0 F
Factory Preset: 0.0 F
Possible Values: 0.0-5.0 F
1. Pressing the NEXT key will display the following screen.
(On all water-cooled units and/or units with a waterside economizer)
Temperature Calibration Offset For
WSM Ent Cond Water Temp Input 0.0 F
Factory Preset: 0.0 F
Possible Values: 0.0-5.0 F
1. Pressing the NEXT key will display the following screen.
(On all water-cooled units and/or units with a waterside economizer)
Temperature Calibration Offset For
Ckt 1 Sat Cond Temp Input 0.0 F
Factory Preset: 0.0 F
Possible Values: 0.0-5.0 F
1. Pressing the NEXT key will display the following screen.
(On all water-cooled units and/or units with a waterside economizer)
Temperature Calibration Offset For
Ckt 2 Sat Cond Temp Input 0.0 F
Factory Preset: 0.0 F
Possible Values: 0.0-5.0 F
1. Pressing the NEXT key will display the following screen.
(On all water-cooled units and/or units with a waterside economizer)
Temperature Calibration Offset For
Ckt 3 Sat Cond Temp Input 0.0 F
Factory Preset: 0.0 F
Possible Values: 0.0-5.0 F
1. Pressing the NEXT key will display the following screen.
SETUP