Trane LIFT 81-P - Range; Accessories; Compliance; Machine Identification

1 | General
5
A Packaging plate
1.2.1 Symbols
This publication contains the following symbols:
Loose accessories
MN High and low pressure gauges
CR
Remote control panel
AG Rubber shock absorbers
AM Spring shock absorbers
1.5 Compliance
1.3 Range
The device complies with the following standards:
Machinery Directive 2006/42/CE
PED Directive 2014/68/EU
Electromagnetic Compatibility Directive 2014/30/UE
LVD Directive: 2014/35/UE
LIFT 81-P
LIFT 91-P
LIFT 101-P
LIFT 131-P
LIFT 151-P
LIFT 162-P
LIFT 182-P
LIFT 202-P
LIFT 262-P
LIFT 302-P
LIFT 402-P
LIFT 522-P
LIFT 602-P
LIFT 804-P
LIFT 1044-P
LIFT 1204-P
Refrigerants legend
•
/Y = R134a
•
/J = R513A
1.6 Machine identification
1.3.1 Available versions
LIFT Heat Pump
1.4 Accessories
Factory fitted accessories
IM Automatic circuit breakers
SL
Unit silencement
RFM
Cooling circuit shut-off valve on discharge line
RFL
Cooling circuit shut-off valve on liquid line
PV3E
3-Way electronic pressostatic valve for evaporation control
PV3C 3-Way electronic pressostatic valve for cold start
FI Antifreeze heater for evaporator and condenser
SS Soft start
IS
Modbus RTU protocol, RS485 serial interface
IST
Modbus TCP/IP protocol, Ethernet port
ISB
BACnet MSTP protocol, RS485 serial interface
ISBT BACnet TCP/IP protocol, Ethernet port
ISL
LonWorks protocol, FTT-10 serial interface
ISS
SNMP protocol, Ethernet port
IAV Remote set-point, 0-10 V signal
IAA Remote set-point, 4-20 mA signal
IAS
Remote signal for second set-point activation
IDL Demand limit from digital input
0-10 V signal for the management of the 3-Way electronic
IVE
IVC
pressostatic valve for evaporation control
0-10 V signal for the management of the 3-Way electronic
pressostatic valve for cold start
A Packaging plate
B Frame feature plate
C
Electrical board feature plate
Danger Draws attention to actions that can cause serious
injury if not performed correctly.
Prohibited Draws attention to actions that impose a
prohibition.