From the adjustment menu, select the second set-point menu and
press the ENTER key.
By using the UP and DOWN keys it is possible to choose between the
second machine set-point in the heating or cooling operating mode.
Once the second set-point you wish to change has been selected,
press the ENTER key and set the desired value by using the UP and
DOWN keys.
Press the ENTER key to confirm.
The remote set-point can be enabled or disabled by using the UP and
DOWN keys.
Press the ENTER key to confirm.
7.4
Unit Status
The unit status can be displayed.
Press the ENTER key to access the main menu.
Remote set-point (accessory)
In units fitted with the IAV or IAA accessory (factory fitted
accessories), the set-point can be modified by using a remote signal.
Operation can be enabled by using the remote set-point function.
From the adjustment menu, select the remote set-point menu and
press the ENTER key.
Select the Unit Status menu.
Press the ENTER key to access the Unit Status menu.
Press the ENTER key.
Inputs and outputs
Select the Input/Output menu.
To Next Page
Loading...
