Trane Optimus RTHD - Rigging Dimensions (Continued); Unit Lift and Tipping Hazards

Installation Mechanical
RTHD-SVX01K-EN 21
WARNING
Heavy Objects!
Failure to follow instructions below could result in unit
dropping which could result in death or serious injury,
and equipment or property-only damage.
Ensure that all the lifting equipment used is properly
rated for the weight of the unit being lifted. Each of the
cables (chains or slings), hooks, and shackles used to
lift the unit must be capable of supporting the entire
weight of the unit. Lifting cables (chains or slings) may
not be of the same length. Adjust as necessary for even
unit lift.
Figure 6. Lifting location point weights and dimensions
(a)
(a) Optional AFD is not shown. See Figure 3, p. 9 for location of optional AFD. Lifting weights and center of gravity measurements are shown for both unit
configurations in tables below.
Y
Z
A
B
C
D
X
=C.G.