Trane PM014 - Recommended Configuration

10 BAS-SVX33F-EN
Pre-Installation
Recommended Configuration
The power supply module can be mounted onto a DIN rail as illustrated in Figure 2 . Place DIN rail
end stops at each end of the configuration to prevent shifting of modules.
Figure 2. Correct horizontal mounting
PM014
24
VAC
XFMR
OUT
24
VAC
DIN rail
end stop
DIN rail
end stop
Vent clearance
Vent clearance
1.8 in. min.
(4.6 cm)
1.8 in. min.
(4.6 cm)
Power supply
module
24 Vac input
connection