Trane ProSpace PTHF User Manual

16
PTAC-SVX002A-EN
4. Lift unit level and slide unit into wall sleeve until foam seal rests firmly against front of wall sleeve.
5. Secure with four screws (supplied) through the unit flange holes.
6. Re-install front panel by first, hooking tabs over top rail of unit and then pushing in on the bottom of the front
panel until it snaps into place.
IInnssttaallllaattiioonn

Trane ProSpace PTHF Specifications

General

Brand	Trane
Model	ProSpace PTHF
Category	Air Conditioner
Language	English