EasyManuals Logo

Trane SPLIT AC User Manual

Trane SPLIT AC
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8 48626782 rev 2
Contents
Operate this unit with stable voltage in range of 230 ± 10%,
single phase. If not done, compressor can vibrate and damage
refrigeration system.
Use only fuse of correct capacity. Incorrect wire can cause
breakdown or re.
Turn off
the power
supply
If you detect burning smell or smoke, turn o power supply
and contact customer care centre immediately.
Don’ts
Do not try to repair this unit. It can cause damage.
Do not block air intake or outlet vents of both outdoor and
indoor units. It can decrease the performance of the unit or cause
malfunction.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Trane SPLIT AC and is the answer not in the manual?

Trane SPLIT AC Specifications

General IconGeneral
TypeSplit AC
Cooling CapacityVaries by model (e.g., 1.5 Ton, 2 Ton, etc.)
Energy Efficiency Ratio (EER)Varies by model (typically ranges from 8.5 to 12.5)
Power Supply220-240V, 50Hz
RefrigerantR-410A
Noise Level (Indoor Unit)Approximately 19-45 dB(A)
Noise Level (Outdoor Unit)Varies by model (e.g., 50-60 dB(A))
Air Flow (Indoor Unit)Varies by model
Dimensions (Indoor Unit)Varies by model
Dimensions (Outdoor Unit)Varies by model
Weight (Indoor Unit)Varies by model
Weight (Outdoor Unit)Varies by model

Related product manuals