BAS-SVU054A-EN
11
Mobile Application
The Symbio™ Service and Installation mobile app provides advanced configuration, setup,
status updates, alarms, and service capabilities for the Symbio 700 controller via Bluetooth
connection.
The Symbio 700 can connect to mobile devices that support BLE version 4.2 and higher. Only one
connection is allowed at a time to prevent another user from connecting to the system while it is
already in use. If a connection is lost, whether accidental or purposeful, a timer is used to prevent
the controller from being locked by a user that does not disconnect the controller in a preferred
manner.
The Symbio Service and Installation app is required to configure the following:
• BACnet® over ZigBee® (Air-Fi® Wireless)
• BACnet IP
• BACnet MS/TP
• LonTalk
To Next Page
Loading...
