Trane Symbio 700 - Controller Overview; Model Options and Configuration; Functionality Comparison by Feature

6
BAS-SVU054A-EN
Controller Overview
The Symbio 700 has two model options:
• SSttaannddaarrdd CCoonnffiigguurraattiioonn — provides standard troubleshooting via on-board user interface
(UI) and access to the Symbio Service and Installation mobile app.
• AAddvvaanncceedd CCoonnffiigguurraattiioonn — introduces additional troubleshooting tools and Building
Automation System interface via BACnet® (ANSI/ASHRAE Standard 135-2016) or LonTalk™.
To upgrade from Standard Functionality to Advance Functionality a new Symbio 700 controller
must be purchased with the Advance Functionality and installed on the equipment.
Functionality
Feature
Standard Functionality Advanced Functionality
Event Log
Only show last 5 through Mobile Service Tool
Unrestricted on Mobile Service Tool
Unavailable on Onboard UI Unavailable on Onboard UI
Active Alarms
Most Current with Highest Priority through
Mobile Service Tool
Unrestricted
Unrestricted with Onboard UI
Export Trends
Not Allowed on Mobile Service Tool
Unrestricted on Mobile Service Tool
Not Allowed on Onboard UI
Communication Protocol None
BACnet MS/TP
BACnet Air-Fi
BACnet IP
LonTalk
TGP2 None Unrestricted