BAS-SVP039C-EN
B–4
The controller automatically detects devices on any of the ports (not port specific). The controller
ships with all ports enabled, but they can be disabled via the Web interface.
NNoottee:: The USB ports are not to be used for any devices that are not Trane approved, such as
cellular phones.
Figure 13. Ethernet port 2
NNoottee:: Ethernet Port 2 is for use with the Touch Screen display only. Communication to other
devices is not supported.
SSyymmbbiioo™™ 880000 CCoonnttrroolllleerr DDiissppllaayy
To Next Page
Loading...
