Trane TCONT602AF22MA Installation Instructions

In Recovery
Auxillary
Heat On
12
Quick reference to controls
Digital display screen Battery holder (see page 10)
Temperature buttons
Press to adjust temperature
settings
Hold button
Press to override programmed
temperature control
Function buttons
Press to select the function displayed just above each button.
(Functions change depending on the task.)
Quick reference to display screen
Battery replacement
Press and pull to remove Insert fresh AA
alkaline batteries,
then reinstall
battery holder
Current inside temperature Low battery warning Current time/day
Current program period
Wake/Leave/Return/Sleep
In Recovery
Adaptive Intelligent
Recovery
Temperature setting
System status
Heat On/Cool On
(If flashing, see page 11)
Auxiliary heat
(Only for heat pumps with
auxiliary heat)
Function buttons
Press the button beneath each function to view or change
settings (functions change depending on the task)
System setting
Heat/Cool/Auto/Off/
Em Heat
Fan setting
Auto/On
Set Clock/Day/Schedule
Press to set time, day or
program schedules.

Trane TCONT602AF22MA Specifications

Temperature Ranges

heat temperature range	40° to 90°F (4.5° to 32°C)
cool temperature range	60° to 99°F (16° to 37°C)
operating ambient temperature	32° to 120°F (0° to 48.9°C)

Humidity

operating relative humidity	5% to 90% (non-condensing)

Electrical Ratings

W (O) heating voltage	20-30 Vac
W (O) heating current	0.02-1.0 A
W1 W2 heating voltage	20-30 Vac
W1 W2 heating current	0.02-0.5 A
Y cooling voltage	20-30 Vac
Y cooling current	0.02-1.0 A
Y2 cooling voltage	20-30 Vac
Y2 cooling current	0.02-1.0 A
G fan voltage	20-30 Vac
G fan current	0.02-0.5 A
X2 emergency heat voltage	20-30 Vac
X2 emergency heat current	0.02-1.0 A
F heat pump reset voltage	20-30 Vac
F heat pump reset current	0.02-0.5 A

Weight and Dimensions

height	3-9/16” (91 mm)
width	5-13/16” (147 mm)
depth	1-1/2” (38 mm)