Pre-Installation
12 ARTC-SVX002A-EN
Check the box if control wiring is complete, including any additional remote interface panel or special-purpose
wiring.
Check the box if all responsible installing contractors and sub-contractors have been notified to have
representatives available on site to provide technical support for the initial start-up procedure.
Check the box if full load will be available for chiller on the initial start-up date.
Touchscreen Interface Panel: Record version and date of software loaded into the touchscreen interface panel:
Version: ____________________________________ Date: ________________
Note: To view the software version, from the home screen, press the software button on the System Control
screen.
Table 2. Initial startup readiness checklist (continued)
Startup Readiness Dimension
To Next Page
Loading...
Need help?
General
