Trane TZEMT400AB32MAA - Screen Timeout

10Thermostat User Guide
Screen TimeoutUser Settings
Screen Timeout
This is the time before any screen reverts to the Minimized Screen (temperature display only), after you stop pushing
buttons. Minimized Screen feature is disabled by setting this time to “0”.
User Settings
Set Clock
Filter Service
Maint Service
Screen Timeout 0
Done Select
Change the Screen Timeout
1. Press the MENU button.
2. Scroll to User Settings and press the Select button.
3. Scroll to Screen Timeout
4. Press the plus (+) or minus (-) buttons to adjust the time (in seconds).
Î The screen time-out can be set between 0 and 120 seconds. Zero (0) is the default setting. When set to
Zero (0), the minimized screen feature is disabled.
Disable the Minimized Display
1. Press the MENU button.
2. Scroll to User Settings and press the Select button.
3. Scroll to Screen Timeout
4. Press the minus (-) button until zero (0) is displayed.