21Thermostat User Guide
Schedules
Scheduling is usually controlled by your Z-Wave system. See the instructions that came with your Z-Wave system for more
information. However, scheduling may also be controlled by the thermostat.
Î The Schedules menu is hidden by default, but may be enabled in the Installer Settings. See Enable/Disable
the Schedules Menu on page 21 for more information.
The thermostat has a 4 x 7 schedule, meaning the setpoints can be changed up to four times a day each day. Each
day has a separate schedule. Schedules may be copied from one day to another day or group of days. See Copy a Day
Schedule on page 23 for more information.
Select Schedule
Heat and Cool
Preset:Confort
Preset:Energy Star
Done Select
Enable/Disable the Schedules Menu
Because the Schedules menu is disabled by default, you must first enable it before any scheduling can be done at the
thermostat. If you want to use your Z-Wave system for scheduling, scheduling must be disabled in the thermostat.
1. Press the MENU button.
2. Press and hold the two middle buttons simultaneously until the Installer Settings menu is displayed.
3. Scroll to Systems Settings and press the Select button.
4. Scroll to Sched Enable and press the plus (+) button to enable scheduling or the minus (-) button to disable
scheduling.
Î When scheduling is enabled in the thermostat, a Y will be displayed next to Sched Enable. When scheduling
is disabled in the thermostat, an N will be displayed next to Sched Enable.
To Next Page
Loading...
