12Thermostat User Guide
Sensor CalibrationUser Settings
Sensor Calibration
The Sensor Calibration screen is used to change the temperature calibration of the internal temperature sensor. The
temperature calibration can be changed by +/- 7 degrees.
When the Sensor Calibration screen is selected, the current temperature calibration is displayed. In the example screen,
the calibrated temperature is 77 and the number of degrees of offset being applied is 1.
Sensor Calibration
Internal (77) 1
Done
+ -
Change the Sensor Calibration
1. Press the MENU button.
2. Scroll to User Settings and press the Select button.
3. Scroll to Sensor Calibration and press the Select button.
4. Press the plus (+) or minus (-) buttons to change the sensor calibration.
Î After this screen is closed, it may take a few seconds for the temperature displayed on the main
thermostat screen to update to the new temperature.
To Next Page
Loading...
