46 Wireless Sensors • BAS-SVX04C-EN
Maintenance and Troubleshooting
Cleaning the Sensor
NOTICE
Equipment damage!
Spraying glass cleaner or any other solution directly on the sensor may damage it.
You can clean the sensor by applying glass cleaner to a soft, non-abrasive cloth, and
gently wiping the face, including the buttons and LCD display. Use of a pre-moistened
towelette designed for lens or screen cleaning is also acceptable.
Avoid inadvertent pressing of the Occupied/Unoccupied buttons on the model WZS
sensor or the keypad on the WDS sensor, as this may result in an unwanted timed
override or settings change.
To Next Page
Loading...
