12 BAS-SVX17B-EN
Installation
Applying Power to the Sensor
Restore power to the unit controller. The following sequence appears on the display:
• The display lights up and all of the symbols appear for 2 seconds (see Figure 2).
• The software version appears for 2 seconds.
• If the sensor has been in service for any length of time, the home screen appears (see Figure 3A
example). If the sensor is new, the configuration screen appears (see Figure 3B). If no buttons
are pressed for 90 seconds, the display returns to the home screen in constant-volume (CV)
configuration.
• The light dims.
Figure 2. Display with all the symbols appearing
AM
PM
DAYS
HOURS
Mo Tu
We Th Fr SatSu
.
Service indicator, filter timer,
keypad lockout, occupancy
indicator, temporary override
Zone temperature and
setpoint temperature
System settings
Fan settings
Scheduling area/day and clock
Figure 3. Display at power-up
.
.
Mo
AM
B. Configuration screen
Option value
Option number
To Next Page
Loading...
