BAS-SVX17B-EN 19
Operation
Changing the Fan Setting (CV/HP Configuration only)
Setting the Time Clock and the Day
Fan Auto: The fan automatically
powers On and Off as needed to reach
the selected temperature.
1. From the home screen, select the fan setting by pressing
twice and then .
2. Press or to select the desired fan setting.
Note: The sensor can be configured for programmable fan
operation (see Table 3, p. 14). If this feature is enabled,
fan operation is controlled by the schedule. If you
attempt to change the fan setting, the sensor display will
change to temporary override set-up. Follow the
procedure in “Temporary Override Set-up (CV/HP only),”
p. 22 to override the fan setting.
3. To confirm your setting, press or wait 10 seconds. The
home screen will appear.
Fan On: Fan is powered On.
Day of week and time clock
1. From the home screen, select the time clock and day
setting by pressing twice and then three times.
2. Press or to select the hour. The hour flashes.
3. Press or to change the hour.
4. Press to select the minutes. The minutes flash.
5. Press or to change the minutes.
6. Press to select the days of the week. All days of the
week appear, and the currently selected day flashes.
7. Press or to change the day.
8. To confirm your settings, press for 2 seconds, or wait
10 seconds. The home screen will appear.
To Next Page
Loading...
