Trane X1379088401 - Temporary Override Set-up (CV;HP)

22 BAS-SVX17B-EN
Operation
Temporary Override Set-up (CV/HP only)
To override a setting for a specified period of time, start at the home screen and proceed
as follows:
The heating setpoint symbol
flashes when selected.
The cooling setpoint symbol
flashes when selected.
The override symbol flashes
throughout the temporary
override set-up operation.
1. Press or . The current temperature setpoint
appears.
2. Within 5 seconds of Step 1, press to raise the
setpoint or to lower the setpoint. The thermostat
enters timed override mode, giving you the
opportunity to specify the other parameters of the
override.
• The override symbol flashes, and continues
flashing throughout the procedure.
• Either the heating or cooling setpoint symbol
flashes.
Note: The current zone temperature determines whether
the heating or cooling setpoint symbol appears first.
3. Press or to toggle between the heating and
cooling setpoints.
4. Press or to increase or decrease the heating
or cooling setpoint.
The fan setting flashes when
selected.
5. To override the fan setting, press (if starting from
the heating setpoint, press twice). Press or to
change between Auto and On.
Note: Only if the programmable fan option is enabled.
The time setting for override
set-up.
6. Press to specify the amount of time the override
lasts. Press or to select the number of hours.
If your override time is over 23 hours, press or to
select days. Press or to select the number of
days.
The occupancy setting flashes
when selected.
7. To override occupancy, press (if starting from
days, press twice). The occupancy symbol flashes.
Press or to change between occupied and
unoccupied.
The temporary override
symbol appears on the display
and stays on while an override
is present.
8. To confirm your override settings, press and hold
2 seconds, or wait 15 seconds. The home screen
appears with the override symbol on it.
Note: To delete override settings, select temporary override
set-up and press the Test/Configuration button. The
home screen appears without the override symbol.
DAYS
HOURS