4 BAS-SVX17B-EN
General Information
This section provides a description of the sensors, as well as part numbers and dimensions.
Product Description
The Trane
®
programmable zone sensor (p/n X1379088401) can be used with UCP, Reliatel, and
IntelliPak control units. It has the following features:
• A liquid crystal display (LCD) with symbols for zone temperature, temperature setpoints,
system operating modes, day of the week, time of day, and occupancy settings
• Configurable to operate with constant-volume (CV) units, heat pump (HP) units, and variable-
air-volume (VAV) units
• System modes:
– CV: Heat, Cool, Auto, Off
– HP: Emergency Heat, Heat, Cool, Auto, Off
– VAV: Auto, Off
• A cooling setpoint range (occupied) of 45ºF to 98ºF (7.2ºC to 36.7ºC)
• A heating setpoint range (occupied) of 43ºF to 96ºF (6.1ºC to 35.6ºC)
• Two fan modes (CV and HP only): On, Auto
• A table of configurable functional options (see Ta bl e 3 , p . 14 and Ta b le 4 , p . 16 )
• Scheduling function: 7 days per week and up to 4 periods per day, occupied/unoccupied mode
• Temporary override function
• During occupied periods, an auxiliary relay rated for 1.25 A @ 30 Vac with one set of single-pole
double-throw contacts is activated.
To Next Page
Loading...
