032-5090-06C-EN page 15
The XL824 Smart Control is capable of adjusting
the temperature settings throughout the day
according to a user-programmable schedule.
Each day of the week can have its own unique
schedule, and each day can have a maximum of
four Periods.
Important: Scheduling must be enabled before a
schedule can be dened. To verify that Scheduling
is enabled, navigate to MENU>SCHEDULES &
PRESETS and verify that the USE SCHEDULES
button is set to ON.
To set or modify schedules, navigate to HOME >
MENU > SCHEDULES & PRESETS > CUSTOM
SCHEDULE or select SHOW SCHEDULES from
the Temperature Control Panel.
Periods dene the time of day when the target
temperature is adjusted. Each day can have from
1-4 Periods, and each day can have dierent
number of periods. The Scheduling Screen
shows the start time for each Period highlighted
across the top row.
Adding Periods
1. Select ADD PERIOD, the Add Period Screen
is displayed.
2. Select the green circle where you would like
to insert a Period.
3. Choose a name for the new Period or select
New to dene a custom name and select
NEXT.
4. If selecting a new name, enter the name
using the on-screen keyboard.
5. Select NEXT.
6. Add additional periods, the maximum per
day is 4.
7. Select APPLY to save your changes and
return to the Schedule Screen. The new
period should be displayed.
Adding Periods
Add Period
Apply Cancel
6:00 am 8:00 am 6:00 pm 10:00 pm
78º 85º 78º 82º
70º 62º 70º 62º
Wake Away Home Sleep
Select the green target to insert a new period
Navigate to Add Period by selecting: Home Screen > Menu > Schedules & Presets >
Custom Schedule > Add Period
To Next Page
Loading...
